Hot End Educational Model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 500% scale of a standard Creality hot end. It is a cross section model held together using magnets.
- Rating
- 5 / 5
- Likes
- 77
- Downloads
- 278
- Makes
- 4
- Views
- 1,493
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 500% scale of a standard Creality hot end. It is a cross section model held together using magnets. Enables teaching of how the filament runs through the heat sink and into the heat block/nozzle via the bowden tube. A great way to teach others how to troubleshoot clogging issues and heat creep.
Uses 10mm x 3mm magnets. I recommend the strong rare earth magnets. Most of them pressure fit for me, but I did have to glue a few in.
I printed using Pro PLA. 3 perimeters, 20% infill, 0.2 layer height.
Ensure a well calibrated printer to have good threading on the nozzle, heat break and coupler. I have allowed plenty of tolerance, so should not be an issue. I recommend printing the nozzle and heat block first to test your tolerances.
Print time will depend on your printer and settings. I ran on 4 different printers.