1 / 3
RatRig V-Minion PicoBox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Electronics enclosure for the RatRig V-Minion. Supports the BTT SKR Pico and Raspberry Pi Zero 2W (stacked).
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 68
- Makes
- 0
- Views
- 1,368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
This electronics box for the RatRig V-Minion allows the mounting of the controllers (BTT SKR Pico + Raspberry Pi Zero 2W) on the printer itself as opposed to the tethered box that comes with a stock V-Minion.
This remix offers a few enhancements over the original model from Nero 3D. They are:
- Support for Squirrelbrain's Y Axis Drag Chain
- Support for M3 screws to mount the fan
- Relocated and improved access to the case screw next to the Z Axis motor
- Improved support for 4" Self Locking Wire Ties (Zip Ties) to secure the power cables
- Changed SKR Pico text on top to a RatRig logo
- Added large chamfers to top edges
Notes:
- The top mounts to the base using M3 x 4mm x 5mm heat set inserts.
- The base is secured to the underside of the frame using M6 bolts and 3030 t-nuts provided with the printer.
- Print the top with a heat resistant filament (ABS/PC/etc) since it will be in very close proximity to the bed heater.
- STLs are prepositioned for optimal printing, no supports required
Happy Printing!