Gaggia Classic and Rok Tamper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We have a Gaggia Classic Pro and a Rok manual espresso. I wanted a single tamper that i could use for both.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 340
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
We have a Gaggia Classic Pro and a Rok manual espresso. I wanted a single tamper that I could use for both.
Just flip it to either side you need and tamp away. I attempted this first with PLA and PLA+ with no success. The pre heated portafilter, or on the second pull is just too hot and melts it. Use PETG.
I used SUNLU Super Neat PETG 1.75mm filament. Have used it daily for 9 months with no deformation or heat issues at all.
Print Settings:
Anycubic Vyper
Prusa Slicer
PETG
0.25mm layer
Infill: 20% - Gyroid fill
Print with the 50mm (smaller opening) on the bottom.
See settings screen captures below for settings.