Book holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.59 – €6.83 net (excluding VAT)
For file: book holder without text_7h12m_0,16mm_200C_PLA_ENDER3V2NEO.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.21 excluding VAT (range midpoint).
- Weight reported by the author
- 57 g
- Print time reported by the author
- 7.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is designed to fit into very thick law books, like: Habersack "Deutsche Gesetze - Textsammlung" C.H.BECK
- Rating
- 4 / 5
- Likes
- 162
- Downloads
- 615
- Makes
- 2
- Views
- 8,139
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
This is designed to fit into very thick law books, like:
Habersack
"Deutsche Gesetze - Textsammlung"
C.H.BECK
The section which is inserted into the spine of the book has following dimensions:
- Thickness: 4 mm
- Width: 70 mm
- Length: ~74 mm
You can print it with a lower scale for smaller books. Smaller than 50 % is not recommended due to the decreasing thickness of the model.
I uploaded the step file and .SLDPRT file. Feel free to change the size and logo to whatever you want.
Printing parameters
- Layer height: 0.16 mm
- Infill: 15 % (adaptive cubic)
- No supports
- Filament: Creality PLA (black)