Skadis mounting system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting system for Ikea skadis, in case you cut the board in half of want zero seems between multiple boards.
- Rating
- 5 / 5
- Likes
- 119
- Downloads
- 419
- Makes
- 4
- Views
- 3,654
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this Skadis mounting system because I cut my skadis board in half because the size I needed wasn't available, and the package only came with one mounting rail.
I also didn't like that with a bit of misaligment the board had a seam in the middle, so I designed a part to put between the boards, that forces them into alignment.
What you need per board:
2x 4-5×60-80 mm screws for mounting (depends on what you're hanging on your board)
2x 6-8 mm Concrete or drywall anchor (depends on what you're hanging on your board)
2x M3x8-25 for the spacers (the holes can be tight, you have to force these in)
Printed parts:
2x Mount Edge Back
2x Mount Top
2x Spacer Edge Back
2x Spacer Top
In case you want to connect two boards like i did, you need to add these:
2x 4-5×60-80 mm screws for mounting (depends on what you're hanging on your board)
2x 6-8 mm Concrete or drywall anchor (depends on what you're hanging on your board)
2x M3x8-25 for the spacers (the holes can be tight, you have to force these in)
Printed parts:
1x Mount Middle back
1x Spacer Middle Back
2x Mount Top
2x Spacer Top
Hope you enjoy! :D