1 / 2
Stand for 1U devices.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a stabilizer that clamps around the bottom of a 1U device such as a network switch.
- Rating
- 4 / 5
- Likes
- 0
- Downloads
- 22
- Makes
- 1
- Views
- 148
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
It's a stabilizer that clamps around the bottom of a 1U device such as a network switch. Most applications will require you to print two per device for stability.
Indentations on bottom and between uprights are for non-slip pads. I use 1.5mm thick non-slip silicone material that I found on amazon, cut into 20mm squares. An additional pad on one of the uprights will prevent the print from slipping off if device is picked up.
I print these in PLA with triangle infill at 10% and two walls. Very flexible but tough.