Prusa Mini silicone bed leveling mod dialer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.27 – €1.55 net (excluding VAT)
For file: mini silicone mod dialer_0.2mm_PLA_MINI_1h27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.41 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 1.44 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A tool to help you dial in Prusa Mini bed to proper level
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 48
- Makes
- 1
- Views
- 723
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
A remix of the model “Prusa MINI Silicone Bed Leveling Mod - bed tightening jig”, with fully original parts but with strong inspiration from that model.
A slightly thicker plate to better allow multiple colors to be used, with 90 and 270 marked also counter-clockwise to make turning a little bit easier. The hole in the middle is a little bit larger to allow the dial to sit in there tightly. There is a small ring under the dial to keep it centered in the plate and to keep it you need to use supports when printing the dials. You can probably also just cut it from the model if you don't like supports or there is some friction between it and the plate. A light sanding of the top of the plate and the bottom / ring of the dial also make them turn a lot smoother.
I typically use a screw driver with changeable 4mm / 1/8" bits (e.g. Parkside handle with 7.5mm shaft) for this so my dial fits those. There is another dial for standalone screw drivers with 5mm shaft. No, the one for bits doesn't allow the bit to rotate in it. You'll have to align the plate to 0 when starting the adjustment instead of keeping it always in a certain direction.
The ready made gcode file includes two color shifts to mark CCW 90 and 270 separately.
https://github.com/bbbenji/PMSBLM tells more about the whole procedure.
Now with STEP files.