E3DBuggy - Revomobile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the E3DBuggy with Revo nozzle holders.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 24
- Makes
- 0
- Views
- 429
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial
About
This is a remix of the E3DBuggy with Revo nozzle holders on the roof.
Print Settings
I recommend you use a 0.40 mm nozzle and a 0.20 mm layer height or less. Just like the original E3DBuggy stress test there are a number of things that can be challenging to tune and print: Overhangs below the cargo box. Bridging for the roof. Clearances for the print-in-place door. Fine text in the rear plate. Stringing between the roof pillars among other things.
Support
All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)