DMM Holder, Digital Multi Meter Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.02 – €2.46 net (excluding VAT)
For file: DMM Bottom_0.3mm_PLA_MK3S_1h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.24 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 1.81 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mounting bracket for holding a DMM (Digital Multimeter) on a wall.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This 2 piece bracket lets you mount a DMM (digital multimeter) on a wall. The bracket currently holds a DMM that measures 2.7" (69mm) wide and 5.68" (144mm) high. You way need to remix this to fit your specific DMM.
Printing Tips
No supports required for printing. I used .3mm spacing and 10% infill with a .4mm nozzle. Arrange the parts on the print bed as shown in the pictures.
Hardware Required
-3 Screws, I used 1.25" Panhead Screws (I was only able to get 2 in because of clearance issues with the mount. This was because I glued the two pieces together prior to mounting to the wall. Two screws is plenty strong though.)
-Glue, super glue is used to connect the plastic top and the plastic base together (See Picture)