Gutter Drain Tile Screen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screen for putting in the ground and attaching to 4" drain tile for you gutters
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 24
- Makes
- 1
- Views
- 410
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I built a paver patio this summer and wanted to route the water from the gutter underneath, so I bought some drain tile and routed under the blocks before I put the rocks and such in. I then wanted something to sit flush with the patio, so I made this. The screen is removable so you can run a vacuum down if things get bad, and I'm hoping the screen keeps the majority of the junk out. We'll see what happens.
Made of PETG, of course, since it's outside. Designed for the good old fashion Home Depot 4" drain tile.
I included the prusa 3mf because I printed the screen with the housing and it worked just fine. Snap it out cause it sticks a little, but I had no issue with it.