Presto Dehydrator PTFE Tube Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this to fit a PTFE filament guide tube to my Presto brand dehydrator. The tube hole is exact tube…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 506
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this to fit a PTFE filament guide tube to my Presto brand dehydrator. The tube hole is exact tube dimensions. Depending on your printer and preference, the tube may be too tight. If so, just drill it out after printing to get the fit you like. Of course, you will also have to drill some holes in one of your Dehydrator trays; one bigger hole for the tube to pass through, and 2-4 holes for the screws. The screw holes are 2mm radius. Use whatever screws you like; I used just 2 short self tapping screws for mine.
There is a curvature on the mounting flange that matches the Presto. So keep the print orientation as is in the STL file, and use supports.
Also see my controller kit for Presto dehydrators here: https://www.thingiverse.com/thing:2853628
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
25%
Notes:
Use a high temp filament like PETG or ABS.
Post-Printing
You may need to drill the tube hole for a good fit on your PTFE tube.
Category: 3D Printer Accessories