Pico Setup Ruler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 2" x 1" ruled square for setting distances and scribing lines.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 1
- Views
- 270
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This model has 1/16" rulers on most surfaces and notches every 1/8" on almost all surfaces.
It can be used to set router bit depth, router plane blade depth, tablesaw width and height, etc.
You can use a pencil in a notch to draw lines.
This model was designed for a 0.15mm layer height. You don't need much infill, 15% is fine, I've used 5% with no issues (but very little speed up so why bother).
I had real issues with the corners curling up off the print bed so I added tabs to keep them down. It works for my printer. They flex right off, no need for tools.
I sand (lightly! with 220 grit paper on flat surface (like a tablesaw)) the non print bed surfaces to smooth them out. Ironing might work but haven't tried it.