Lowrider CNC - X Axis Cable Management
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple device for keeping your x-axis cable off the table on a Lowrider CNC.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 48
- Makes
- 0
- Views
- 858
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
This is a simple device for keeping your x-axis cable off the table on a Lowrider CNC. The weight on the end clamps onto the cable and the bearing guides the cable. Pretty simple idea but works great.
Weighted Box - Needs M3 x 25 screw and M3 nuts (x4)
Bearing Guide - 608 Bearing, M6 x 30 Bolt, M6 Nut
The bearing guide attaches using the bolt that holds on the inline wheel on the Y-Plate.
Print instructions
Printed without supports. Doesn't need a lot of strength. I did 2 parameters and 20% infill.
Spacer is for M6 bolt going through the bearing.
Spacer M5 is if you want to use an M5 bolt instead of M6.