Craftsman Bandsaw Miter Gage Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a rework of https://www.thingiverse.com/thing:505852 by bruckj to fit the old Craftsman 3 Wheel Bandsaw
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 76
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The miter slot on the Craftsman saw is 16mm by about 7mm deep so I used the same spacing for the holes as bruckj and made the slide fit the miter slot on the Craftsman saw. I had already bought my hardware so if you did the same after seeing bruckj's PDF instructions you will need to print the spacer for the knob as well. Otherwise you will need an M5 45mm bolt instead of the 50mm one. I think the 50mm one is much more easily found, at least I got mine at Lowe's and don't recall seeing any 45mm options.
My original remix on thingiverse:
https://www.thingiverse.com/thing:3339565
I tried importing my designs but for some reason my thingiverse account is all screwed up. My stuff is still there if you search for it by the name of the project, but it is all disassociated from my account.