1 / 3
Craftsman Bandsaw Miter Gage Parts — zdjęcie 1
1 / 3

Craftsman Bandsaw Miter Gage Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a rework of https://www.thingiverse.com/thing:505852 by bruckj to fit the old Craftsman 3 Wheel Bandsaw

Ocena
0 / 5
Polubienia
15
Pobrania
76
Wydruki
0
Wyświetlenia
663
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

The miter slot on the Craftsman saw is 16mm by about 7mm deep so I used the same spacing for the holes as bruckj and made the slide fit the miter slot on the Craftsman saw. I had already bought my hardware so if you did the same after seeing bruckj's PDF instructions you will need to print the spacer for the knob as well. Otherwise you will need an M5 45mm bolt instead of the 50mm one. I think the 50mm one is much more easily found, at least I got mine at Lowe's and don't recall seeing any 45mm options.

 

My original remix on thingiverse:

https://www.thingiverse.com/thing:3339565

I tried importing my designs but for some reason my thingiverse account is all screwed up. My stuff is still there if you search for it by the name of the project, but it is all disassociated from my account.

 

Tagi