1 / 4
KP3S to LGX LITE conversion
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
WARNING! model is still in development. But if you are looking for a quick solution, this will work for you
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 40
- Makes
- 0
- Views
- 1,297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is my first version of a conversion kit for the Bondtech LGX Lite extruder on the kingroon KP3S.
You will need:
- Old M3 screws from your Kingroon KP3S
- 3 additional M3 screws
- 1 M3 nut
- everything from the LGX LITE package
There are still some fitting issues:
- Hose does not fully fit to fan
- fan is not perfectly in place
Therefore you might experience some cooling issues.
I am currently working on a second version, where these issues are adressed.
Until then, this works fine.
IMPORTANT: depending on your filament shrinkage, make sure to print everything slightly bigger. Otherwise there might be fitting issues
HOW TO INSTALL:
- Use two flat nuts from the bondtech kit and install them in the two rectangular holes in the mount.
- Use your old kp3s screws to mount the LGX Lite extruder
- Place a nut in the stopper and attach it to the mount with a M3 bolt
- Install everything on your machine
- Mount fan as usal (FITMENT ISSUE!)
- Screw 2 screws through hose and attach to cover (FITMENT ISSUE)
- Mount cover with 2 M3 screws (should screw into mount)