1 / 4
KP3S to LGX LITE conversion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WARNING! model is still in development. But if you are looking for a quick solution, this will work for you
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 1297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (12)Powiązane
This is my first version of a conversion kit for the Bondtech LGX Lite extruder on the kingroon KP3S.
You will need:
- Old M3 screws from your Kingroon KP3S
- 3 additional M3 screws
- 1 M3 nut
- everything from the LGX LITE package
There are still some fitting issues:
- Hose does not fully fit to fan
- fan is not perfectly in place
Therefore you might experience some cooling issues.
I am currently working on a second version, where these issues are adressed.
Until then, this works fine.
IMPORTANT: depending on your filament shrinkage, make sure to print everything slightly bigger. Otherwise there might be fitting issues
HOW TO INSTALL:
- Use two flat nuts from the bondtech kit and install them in the two rectangular holes in the mount.
- Use your old kp3s screws to mount the LGX Lite extruder
- Place a nut in the stopper and attach it to the mount with a M3 bolt
- Install everything on your machine
- Mount fan as usal (FITMENT ISSUE!)
- Screw 2 screws through hose and attach to cover (FITMENT ISSUE)
- Mount cover with 2 M3 screws (should screw into mount)