1 / 2
Spool Holder Honeycomb Design v1 (free standing, PTFE gliders)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print spool holder for standing free, PTFE-tubes as glider
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 121
- Makes
- 0
- Views
- 545
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Print it lying on the honeycomb pattern without supports. Put PTFE-tubes into the holes for spools to turn easier. You can use less infill for the spool-zylinder, but use more infill for the foot to stand stable.
The holder is for standard spools with a maximum width of 8cm. Minimum hole diameter should be 50mm.
If you have issues inserting the PTFE-tubes in the holes (made with 0,2mm tolerance), consider playing around with a negative horizontal expansion in your slicer.