Silica Holder (for dry box or filament spool)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.63 – €0.77 net (excluding VAT)
For file: silica-holder-mk3s_03mm_pet_mk3s.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.70 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 35.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A holder for silica desiccant pearls to keep with spools in dry bags or keep in a dry box.
- Rating
- 4.667 / 5
- Likes
- 243
- Downloads
- 1,414
- Makes
- 9
- Views
- 10,048
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A holder for silica desiccant pearls to keep with spools in dry bags or boxes. It uses only 2.1g of filament and fits into the inner opening of most filament spools.
The 3MF holds 6 instances, which print in 36 minutes. You can delete those you don't need, but print time per instance will increase.
Print instructions
Printing in PET means you can throw the whole thing in a food dehydrator to dry the silica without the holder warping.
0 top and bottom solid layers.
4 perimeters.
25% rectilinear infill for pearls >1.5mm. If your silica pearls fall through, increase the infill percentage.
35% infill/perimeters overlap.