1 / 5
Case for Raspberry Pi CM4 on Waveshare Nanobase B
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small case for CM4 on Nanobase B and Heatsink from Waveshare. Version with heat seated thread insert and without.
- Rating
- 4.333 / 5
- Likes
- 24
- Downloads
- 377
- Makes
- 5
- Views
- 2,149
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for the CM 4 on a Nanobase B Carrier Board with mounted heastink.
Components:
Raspberry Pi CM 4: Any variant will do
Nano Base Board B: Link to Manufacturers site. Got mine from Amazon
CM 4 Heatsink B: Also link to Manufacturer. Available on Amazon.
Optional: M3 thread inserts. Designed for CNCKitchens short M3 inserts
Assembly:
- (Optional) Seat thread inserts or just print version without inserts.
- Breakout the pieces for Audio and WiFi if needed.
- Put thermal pads on the chips of the CM4
- Put Heatsink through holes of top of the case.
- Screw CM4 with the short screws (supplied with Heatsink) to the Heatsink
- Push Nano Base Board on CM4
- Put bottom onto case. Nano Base will be hold in Place by the bottom.
- Put in M3x12 Screws