L-BOXX Grid/Baseplate for 42 units
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
complete kit for size 136 an up to fill the floor with insetboxes
- Rating
- 0 / 5
- Likes
- 42
- Downloads
- 125
- Makes
- 1
- Views
- 2,270
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Lets you fill the floor of your Bosch/Sortimo L-BOXX 136 or bigger with
- Auer Insertable Bins
- Sortimo Inset Boxes
- or my offer of Stackable Insertboxes prints.
The latter need their optional feet to engage with the baseplate; they can be easily retrofitted to already printed boxes.
Total capacity: 42 Units. Size 136 L-BOXX allows a stack up 1.5 height units.
Changelog
| 2022-11-27 | v0.14 | initial public release |
Bill of material
- Baseplate 4x4 (1x)
- Baseplate 3x4 (1x)
- Baseplate 1x4 L-BOXX A (1x)
- Baseplate 1x4 L-BOXX B (1x)
- Baseplate 1x3 L-BOXX A (1x)
- Baseplate 1x3 L-BOXX B (1x)
- Platelink (10x)
- Plate distancer 18mm (4x)
Production
Use the three provided 3mf files,
- set your printer model
- set your chosen material
- set compensation for material shrinkage (for larger grids)
and you're good to go!
Should your printer have a smaller printbed than 250x210mm, smaller baseplates are available here to fit your printer.
Assembly
Platelinks and Plate distancers are directional - the slot cavity has to be visible after assembly. They are clipped into their cavities without tools, and hold astonishingly well.
To remove, twist the baseplates slightly, or use a screwdriver in the slot cavity to bend them open.
