L-BOXX Grid/Baseplate for 42 units
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
complete kit for size 136 an up to fill the floor with insetboxes
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 2270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Lets you fill the floor of your Bosch/Sortimo L-BOXX 136 or bigger with
- Auer Insertable Bins
- Sortimo Inset Boxes
- or my offer of Stackable Insertboxes prints.
The latter need their optional feet to engage with the baseplate; they can be easily retrofitted to already printed boxes.
Total capacity: 42 Units. Size 136 L-BOXX allows a stack up 1.5 height units.
Changelog
| 2022-11-27 | v0.14 | initial public release |
Bill of material
- Baseplate 4x4 (1x)
- Baseplate 3x4 (1x)
- Baseplate 1x4 L-BOXX A (1x)
- Baseplate 1x4 L-BOXX B (1x)
- Baseplate 1x3 L-BOXX A (1x)
- Baseplate 1x3 L-BOXX B (1x)
- Platelink (10x)
- Plate distancer 18mm (4x)
Production
Use the three provided 3mf files,
- set your printer model
- set your chosen material
- set compensation for material shrinkage (for larger grids)
and you're good to go!
Should your printer have a smaller printbed than 250x210mm, smaller baseplates are available here to fit your printer.
Assembly
Platelinks and Plate distancers are directional - the slot cavity has to be visible after assembly. They are clipped into their cavities without tools, and hold astonishingly well.
To remove, twist the baseplates slightly, or use a screwdriver in the slot cavity to bend them open.
