Ikea LedBerg clip for Vertex K8400
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ikea Ledberg mount loosely based on the old, discontinued Dioder mount.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
As I found out the Ikea Dioder series was discontinued and I still wanted to put LED-strips in my 2nd Vertex K8400 I bought the replacement series "Ledberg" LED-strips. These need a slightly bigger clips than the Dioder series did so I remixed H60's design to fit the "Ledberg" series. Also, the "new" 2017 series has only 6 LED's per strip, these are a bit brighter than the Dioder LED's btw as can be seen the picture.
A couple of drawbacks of the Ledberg series are:
- There are only 3 strips in a package, but, the adapter allows for the connection of 4 strips. The adapter can supply 3 watts and the light strips use 6 x 0.06 watts = 0.36 Watts, so 4 strips only use 1.44 Watts, well within the limit. I observed no temperature change in the adapter running 4 strips.
- These LED-strips do not include the short wires to connect the strips around corners. I choose to solder wires directly to the strips, though a bit of extra work this works fine! Using a wire of 5 cm or 2 inches for the Metric impaired will do nicely.
Print Settings
Printer:
Vertex K8400
Rafts:
No
Supports:
No
Resolution:
0.2 mm layers
Infill:
25%
Category: 3D Printer Parts