Snapmaker 2.0 Linear Rail Guide Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapters to connect the Snapmaker bed frame to the linear rail guide supports.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 79
- Makes
- 1
- Views
- 862
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Adapters to connect the Snapmaker bed frame to the linear rail guide supports.
This upgrade adds supports at the front and back corners of the bed frame to prevent bending down during actions at the limits of the Y axis
Version 4 will fit the new design for the metal bedframe.
Version 5 will fit the new bed frame with the bracing kit
Holes spacing on the bearings is not square so to prepare this for printing mirror it in your slicer.
1x normal
1x Mirrored about the vertical axis
1x Mirrored about the horizontal axis
1x Mirrored about both the vertical and horizontal axis
Link for the rails used is provided below.
OrangeA SBR Linear Rail 16-800mm
https://www.amazon.com/gp/product/B07D9JRPG9/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1