Spool adapter for Ender 3 Pro (Read Description)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tired of the old sad twitchy spool attachment system on Ender 3 Pro. Say no more...
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
Tired of the old sad twitchy spool attachment system on Ender 3 Pro.
Say no more. Here I bring you brand new attachment system for any spool with hole in the middle with diameter up to 8 cm.
Takes about 5 hours to print with 15% gyroid infill and .24 layers when sliced by a Prusa slicer. I think you could get away with less infill and taller layers.
Other supplies used:
4x bearings with 22 mm outside diameter and 8 mm inside diameter,
1x ~15 cm long threaded rod with 8 mm diameter,
2x 8 mm nut
I suppose you could print all of above too, but I didn't feel like having the 8 mm plastic threaded rod break and the spool fall on the printing bed.
Fit is quite tight on bearings so you might need a vice to press them in, otherwise I recommend enlarging a model in the slicer to 100.5% in X-Y direction
You are a smart person so I trust you with the assembly ;)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament: C-tech PLA Natural
Category: 3D Printer Parts