1 / 4
Millright Mega V Z homing switch mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An alternative switch mount for the millright mega V.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 1
- Views
- 142
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Simple rear-mounted Z limit switch mount for the Millright Mega V, replacing all of:
- the long-armed limit switch,
- “Z Engager Bracket”
- “Z Engagement Stud”
- m5x35mm screw, lock washer, and nut
- long armed limit switch
- extension piece, and screw
with a single bracket and a roller limit switch (I used a TEMco CN0097)
Two brackets are included:
- A larger (slightly adjustable) bracket that holds the limit switch off to the side so that the switch can sit lower, for the original Z plate
- A smaller bracket for z-plates that can travel closer to the top of the Z axis linear rails