1 / 4
IKEA VARIERA Cutlery Organizer Dividers — image 1
1 / 4

IKEA VARIERA Cutlery Organizer Dividers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dividers for the IKEA VARIERA Cutlery Organizer to divide the existing compartments into some more sane sizes

Rating
5 / 5
Likes
21
Downloads
75
Makes
2
Views
1,136
Reviews
1

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

Dividers for the IKEA VARIERA Cutlery Organizer to divide the existing compartments into smaller ones for better space utilization.

Gluing the dividers in place with super glue seems to work perfectly fine (at least so far).

I had to use a brim for the large divider to prevent it from bowing too much from end to end, but other than that there should be no issues in printing them

My print:
Printer: Prusa MINI+
Filament: 3DE Premium - Light Wood PLA
Layer height: 0.20 mm
Infill: 25%

I used wood-infused PLA to try and match the color of the bamboo tray. The Wood-PLA is more fragile than regular PLA so i upped the number of perimeters and added some more infill to try and combat the lesser layer adhesion.

With regular PLA you can probably get away with a smaller amount of infill.

Everything was printed on my Prusa MINI. The longest model barely fits, but it does just fit.

Tags