1 / 4
IKEA VARIERA Cutlery Organizer Dividers — zdjęcie 1
1 / 4

IKEA VARIERA Cutlery Organizer Dividers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dividers for the IKEA VARIERA Cutlery Organizer to divide the existing compartments into some more sane sizes

Ocena
5 / 5
Polubienia
21
Pobrania
75
Wydruki
2
Wyświetlenia
1136
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Dividers for the IKEA VARIERA Cutlery Organizer to divide the existing compartments into smaller ones for better space utilization.

Gluing the dividers in place with super glue seems to work perfectly fine (at least so far).

I had to use a brim for the large divider to prevent it from bowing too much from end to end, but other than that there should be no issues in printing them

My print:
Printer: Prusa MINI+
Filament: 3DE Premium - Light Wood PLA
Layer height: 0.20 mm
Infill: 25%

I used wood-infused PLA to try and match the color of the bamboo tray. The Wood-PLA is more fragile than regular PLA so i upped the number of perimeters and added some more infill to try and combat the lesser layer adhesion.

With regular PLA you can probably get away with a smaller amount of infill.

Everything was printed on my Prusa MINI. The longest model barely fits, but it does just fit.

Tagi