1 / 5
Battery Adaptor for Von Haus 12V battery
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printed adaptor for a 12V Von Haus battery from their portable air pump.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A small connector that friction fits to a Von Haus 12V battery for their air pump ( https://www.vonhaus.com/vh_en/12v-tyre-inflator ). Enables you to connect to different items via leads.
Printed at 0.28mm layer height and 10% infill, no supports.
To connect you will need two 4mm by 12mm bolts and 4mm nuts to make the terminals. I've used two 4mm ring crimp connectors to save solder to connect to the wires.
Included is a picture of the battery.