1 / 1
Pi 4 Snapfit fan 40mm case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An alternative Model of the Pi 4 Snapfit case from @Ash which fits an 40 mm fan.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Had an 40 mm fan laying around, so I adjusted the case to fit a 40 mm fan.
Also make sure the set the top and bottom layer to 0 and a 2D infill in the slicer to get the look-through look.
The print in the images has the gyroid infill (not a 2D infill) with an percentage of 15%