1,25" eyepiece to T2 thread adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1,25" eyepiece to T2 (M42x0.75) thread adapter
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 75
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Share Alike
Note: This model has been updated. See: https://www.printables.com/model/1508496-adapter_125_eyepiece_to_t2-recapitulation-and-upda
1,25" eyepiece to T2 (M42x0.75) thread adapter.
The T2 thread (M42x0.75) should be printed with a layer height of 0.07mm. The rest of the part can be printed with 0.2mm. See configuration.
Recommended material PETG
It can be printed without support material.
With a quality filament (PETG prusament) and a good maintenance of the printer, you should not have any problem to print the fine pitch thread.
You will have to insert two M4 DIN934 nuts, before going over the 4 mm holes with a drill.