Hypercube + EVA 2 + Sherpa + Sailfin

I realized that I'd a lot of spare parts laying around, so I decided to build another original hypercube from tech2c. It's an easy, cheap and reliable printer, also nowadays with #SpeedBoatRace, 48v/32 bits boards, I'll give a try with a small, lightweight X grant and easy to customize printer. Let's see how fast it can go :)

EVA

I've adapted a face from a project FLEX MOUNT due to a solid way to integrate the dual busher and belt tension system. That face is compatible with EVA 2 mounts for all hotends that support universal face.You use a bunch of hotend supported by EVA 2 system (v6, mosquito, nova, rapido etc).

For now I only upload the adapted face for X carriage. You can get direct from EVA 2 site, according to your hotend. You need to download_face, _face_clamp and**_support. Visit https://2.eva-3d.page/. As an extra you can use EVA nice shrouds :)

X Grant

To complete the X grant you need to grab "druckkopftraeger", "schieber" and "schieber_klemmplatte" from https://www.thingiverse.com/thing:2797701. I've uploaded also the cooling duct that I got from a titan remix for flex mount.

Extruder

Main reason for this remix is due to a lack of options to use a light extrusor using nema 36. I've drilled holes for both sherpa mini extruder and sailfinn extruder. You can get the STL's and instructions directly from their github.

Sailfin extruder : https://github.com/CroXY3D/Sailfin-Extruder

Sherpa mini : https://github.com/Annex-Engineering/Sherpa_Mini-Extruder

I won't mount that yet, but will update the design if I make some improvements or fixs.

Hope it is useful for anyone. Probably I'll be the one to build an original hypercube in 2022 :)

Print Settings

Printer:

Delta printer

Rafts:

Supports:

No

Resolution:

Infill:

50

Notes:

Category: 3D Printer Extruders