1 / 3

Android Wear Fossil Charger USBC Mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

gltovar

@gltovar

Convert a fossil charging pad to accept a usbc cable

Rating: 5 / 5
Likes: 5
Downloads: 14
Makes: 1
Views: 418
Reviews: 1

Updated at source: Dec 4, 2022

Model information

Source: Printables
Category: Portable Devices
License: Creative Commons — Attribution

Details Files (2)Makes & comments (Makes: 1) (Comments: 2)Remixes (0)Collections (4)

Summary

Convert a Fossil style Android Wear charging mat from being a charger with a built in usb-a cable, to a compact modular usbc device.

What you need

(affiliate links, thanks for your support)

Android Wear Fossil Charger - used this one from amazon: https://amzn.to/3UyCFEO
2x 8mm countersunk m3 bolt and nut
Sparkfun sytle usbc breakout board - https://amzn.to/3VxfBb1

How To

The pins are wired on the charging tock to be

Inside radius pin = VCC
Outside radius pin = GND

So when you cut and strip the wires you need to solder the inside radius pin wire to the “VBUS” pin on the usbc breakout, and the outside radius pin to the “GND” pin on the break out.

Test fit component and when everything is soldered up, close it up with the bolts and nuts.

Support

If you have found this helpful consider scrolling to the top and tap the donate button.

Source

Modeled with OnShape, edit it here.