Android Wear Fossil Charger USBC Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert a fossil charging pad to accept a usbc cable
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 419
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Summary
Convert a Fossil style Android Wear charging mat from being a charger with a built in usb-a cable, to a compact modular usbc device.
What you need
(affiliate links, thanks for your support)
- Android Wear Fossil Charger - used this one from amazon: https://amzn.to/3UyCFEO
- 2x 8mm countersunk m3 bolt and nut
- Sparkfun sytle usbc breakout board - https://amzn.to/3VxfBb1
How To
The pins are wired on the charging tock to be
- Inside radius pin = VCC
- Outside radius pin = GND
So when you cut and strip the wires you need to solder the inside radius pin wire to the “VBUS” pin on the usbc breakout, and the outside radius pin to the “GND” pin on the break out.
Test fit component and when everything is soldered up, close it up with the bolts and nuts.
Support
If you have found this helpful consider scrolling to the top and tap the donate button.
Source
Modeled with OnShape, edit it here.