1 / 2
TIG filler rod tube dividers — image 1
1 / 2

TIG filler rod tube dividers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Collection of 4 divider designs make to fit Blue Demon RST-36 TIG filler rod storage tubes

Rating
0 / 5
Likes
20
Downloads
180
Makes
0
Views
965
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

Collection of 4 divider designs make to fit Blue Demon RST-36 TIG filler rod storage tubes

2 compartment 50/50, 

3 compartment 50/25/25, 

3 compartment 33/33/33, 

4 compartment 25/25/25/25

 

No special printing requirements. Did mine with a 0.6mm nozzle (what was in the printer at the time) in PLA with 15% infill. Print with outer ring down (widest part of print).

 

Parts are sized to snap into the tubes. For mine I flipped the tube over and placed it over the ring on the floor and pressed down while wiggling to snap them in. I had one tube I had to run a reamer around in the inside edge to remove a small amount of material to get the last one to snap in. 

 

FreeCAD file included if you want to make alters. 

Tags