1 / 2
Svítící stromek / Christmas Lighted Decoration — image 1
1 / 2

Svítící stromek / Christmas Lighted Decoration

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Umožňuje zespoda vložit LED, doporučují svítící filament a UV LED. Use a glowing filament and insert a UV LED.

Rating
0 / 5
Likes
6
Downloads
32
Makes
1
Views
234
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

zespoda otvor pro 3mm LED, celý stromek je dutý; spodní kmen má 2 perimetry (vnitřní+vnější), nad 40. vrstvu je pak mód vázy 1 perimetr / hole for 3mm LED from below, the whole tree is hollow; the lower part has 2 perimeters (inner + outer), above the 40th layer is the vase mode 1 perimeter

vrstva / layer 0.15mm

40 spodních plných vrstev / 40 bottom solid layers

1 perimetr

vasemode

bez podpor, límec je součástí modelu / without supports

od výšky 6mm členitý povrch: tloušťka 0.1, vzdálenost 0.8 / from height 6mm rugged surface (fuzzy effect): thickness 0.1, distance 0.8 

Pokud slicer neumožňuje kombinovat mód vázy a modifikátor s funkcí členitý povrch, slicujte celý model bez členitého povrchu a podruhé s členitým povrchem a v textovém editoru oba g-kódy od výšky 6mm prohoďte.

If the slicer does not allow you to combine the vase mode and the modifier with the fuzzy effect (Prusaslicer 2.5.0), slice the entire model without fuzzy effect and a second time with the fuzzy effect, and in the text editor swap both g-codes from a height of 6mm.

Tags