1 / 3
MK5/MK6 filament plunger screw guide (anti vibration) — image 1
1 / 3

MK5/MK6 filament plunger screw guide (anti vibration)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is for the old MK5/6 makerbot extruder

Rating
0 / 5
Likes
0
Downloads
17
Makes
0
Views
232
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This is for the old MK5/6 makerbot extruder

Print instructions

MK5/6: http://www.youtube.com/watch?v=MKfpU7ZJyJo (after)

Then, few prints and your perfect presure over the filament gets modified by this vibration. This guide removes all the problem.

Instructions

  1. Print (I used 0.4 mm nozzle, 0.3 mm layer, 60% fill)
  2. Screw the original screw, the hole is tight so I used a bit of 3-in-1 oil to make the screw thread
  3. Insert the piece and screw into near the original nut (keep the nut near this guide)
  4. Adjust the filament pressure now, it will be rock solid :)
  5. Enjoy!

Tags