Body+Chassis Rectangle 4WD car
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.11 – €5.03 net (excluding VAT)
For file: Platforma_0.3mm_PETG_4h6m_MK3S.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.57 excluding VAT (range midpoint).
- Weight reported by the author
- 72 g
- Print time reported by the author
- 4.09 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Body+Chassis Rectangle 4WD car
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 453
- Makes
- 0
- Views
- 1,471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I have built a 4WD car and programmed it to be controlled by phone. However, it didn’t look quite right, so I designed a new body. Since my printer isn’t large enough, I scaled it down slightly (to 97.5%) in PrusaSlicer. The result turned out really well! :)
It even fits the original chassis (at least the side screws do). I also created a chassis design based on the original, so I can scale that as well if needed.
During printing, I noticed two errors, which I’ve fixed in the shared project. Specifically, the bridges were too long (as shown in the last photo). While they’re still somewhat long, my print was successful even with bridges twice as long, so it shouldn’t be an issue now.
Feel free to print it if you'd like! :)
Printing
Grid infill is crucial here as some sections are hard printable without support, grid help here a lot.
No brim and skirt.
Print without support (depend of the printer probably).