South Bend 9 - IGaging DRO Mounting Components
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.24 – €0.29 net (excluding VAT)
For file: iGaging - linear scale end cap_0.6n_0.3mm_ASA_MK3S_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 13.2 min
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Parts needed to mount a carriage and crossfeed Igaging DRO scale. Also, a .dxf pattern for a sheet metal display stand.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 95
- Makes
- 0
- Views
- 879
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I used ASA filaments with good results. The scale standoffs also provide holes for 4-40 brass threaded inserts to be melted in place with a soldering iron. Likewise, the carriage sensor mount also uses the 4-40 brass threaded isnert. Likewise, the cable clips for the display stand whose pattern is provided as .dxf file to be cut from steel sheet 0.1" or 2.5mm thick.
For brass threaded inserts, I used 'E-Z Lok' brand, PN HI-004-WH.
PLEASE NOTE: IN ORDER TO MOUNT THE I-GAGING ENCODER SCALE UNDER THE CROSSFEED SOME MATERIAL MUST BE MILLED OFF OF THE CROSS FEED COVER TO CLEAR THE SCALE. WILL NOT WORK IF YOU DONT MILL THIS MATERIAL!