Ender 2 Pro EZOut V2 Filament Runout Sensor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the EZOut V2 filament runout sensor for Ender 2 Pro
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 44
- Makes
- 0
- Views
- 756
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
I recently upgraded the main board in my Ender 2 Pro to a TH3D EZBoard V2 and purchased an EZOut filament sensor to go with it. When deciding on how I was going to mount the unit to my printer I couldn't find any models that had all the criterions I was searching for…so I decided to make my own. This model is rather simple and requires minimal amounts of filament to make.
The model also requires the screws on the Z-axis lead screw to be unfastened. I had trouble with getting it back together and nearly lost the lock washers that hold the brass mount that holds the X-axis gantry…I am fairly certain these are important and may not be replaceable with standard washers if lost….although I would go with standard washers if I lost mine.
Additionally, two (#2) M3X20 bolts and two (#2) M3 nuts will be required for this installation. This holds the rear bracket to the front mounting bracket of the model that mounts to the printer.
In the future I will most likely make some changes to the model to add a filament guide and mountable filament cleaner.
This model should also work for Ender 3 series printers that have a similar bowden setup and extruder position.
Requirements
- (2) M3X20 bolts
- (2) M3 Nuts
- EZOut Filament Runout Sensor
Print settings used
- 20% Infill
- PETG Sunlu brand
- Supports are needed for the face bracket (only on build plate)