Imou A1 (Ranger 2) IP Cam Angled Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple but effective slightly downward angled stand for the Imou A1 (Ranger 2) IP Cam.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 137
- Makes
- 0
- Views
- 801
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
So we have an Imou cam here at home to keep track of the dogs when we are away. However the Imou A1 (Ranger 2) cam can be pointed upwards pretty good but does not go that far downwards. So we have to help it a bit by angling it more downward! This way we can place the cam on a cupboard, also move it around, and still see the dogs at their sleeping spot. Usually I would just put a pencil or something underneath the back of the cam, but it would sometimes get knocked off and was not the most optimal solution.
I started out by making an elaborate big round model which would take a lot of time to print (and filament). But then it suddenly dawned on me the solution could be much more simple! Could I just make a triangle, lower an Imou shape into it and just cut that out? Could it be so simple? Yes.. it was that simple :)
I printed it on my Mini+ with 0.4 nozzle, 0.25 draft settings, 3 layer perimeter, Prusament PETG (2 layers and whatever settings will probably do as well). Infill does not matter since it's only walls I guess.