1 / 7
Inner Y Rail specific Y Motor Mount for NEMA 17 Motors — image 1
1 / 7

Inner Y Rail specific Y Motor Mount for NEMA 17 Motors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This mount is designed to be both the inner Y rail corner support and the Y motor mount.

Rating
0 / 5
Likes
3
Downloads
28
Makes
0
Views
360
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This mount is designed to be both the inner Y rail corner support and the Y motor mount. it bolts onto the inside of the two rear 20mm extrusions and the Y rail extrusion. The motor mounting screw locations are designed to be recessed. M3 screws with 8mm washers for the motor mount, M5 screws with 9mm washers for mounting to the frame

EDIT: the mounting holes for the NEMA 17 motor were too close to the back frame. moved them, works fine now.

Print instructions

Category: 3D Printer Parts Summary

This mount is designed to be both the inner Y rail corner support and the Y motor mount. it bolts onto the inside of the two rear 20mm extrusions and the Y rail extrusion. The motor mounting screw locations are designed to be recessed. M3 screws with 8mm washers for the motor mount, M5 screws with 9mm washers for mounting to the frame

EDIT: the mounting holes for the NEMA 17 motor were too close to the back frame. moved them, works fine now.

Instructions

Should print fine without support and bolt right into place

Tags