1 / 10
V6 Hot-end Adaptor for Monoprice MP10 / Malyan MA10 — image 1
1 / 10

V6 Hot-end Adaptor for Monoprice MP10 / Malyan MA10

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This adaptor plate allows you to install a standard V6 hot-end on a Monoprice/Malyan printer magnet mount plate.

Rating
5 / 5
Likes
15
Downloads
243
Makes
0
Views
1,473
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

After struggling to find any kind of upgrades that can be done on this Monoprice MP10 printer (same as the MALYAN MA10), I designed and created my own V6 Hot-end adaptor. If you own one of these printers, this adaptor lets you KEEP the magnet mounting plate, and add a far better hot-end.

 

There are two options: Standard, and one with a 2mm indent to hold a strip of three LEDs (just cut 3 from a WS2812B 60/m strip). See the video below for why this makes it even cooler looking :)

 

The specific Hot-End kit I used (and the only one I can guarantee will fit exactly) can be found here (affiliate link of course):

 

 

Print in PETG or ASA (or possibly ABS), using a 0.4mm nozzle, thick walls (1.2mm) and heavy infill (50% or so). You could print it solid if you are able to avoid warping…

 

Update (Feb. 9, 2023): I've added an adaptor for using your Induction sensor by removing the right-hand cooling fan from the V6 kit, and placing the adaptor in its place. This takes you down to a single cooling fan – but gives you back the auto-bed-leveling feature.

 

I'm working on a new version of the whole thing, which will include the option of Direct-Drive extruder… but the current version works quite well.

 

I may later add a version specifically to hold heat-set inserts - for now, just carefully tap M3x12 screws into the rear, and M3x20 to hold the cap portion (counter-sink-style screws are what I designed it for…)

 

** I should note that this eliminates the “auto bed level” sensor - mine never worked after the first week so I just removed it entirely. Plus now I generally use a glass bed, so it wouldn't work anyway. REMOVE any M420 commands from your start G-code after removing that sensor! (But see update above for a fix on that)

 

I may update the design to re-incorporate the screw holes for that… somehow… more iterations will happen as I get better with designing :)

 

I created a video that shows how I came up with the design, a view would be much appreciated:

 

Tags