1 / 8
RockPi E Case (Optional for DC/RS-232 Hat and DIN rail)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of initial design by DinikS. supports my DC(24V) and RS232 Hat and there is a variant for DIN-Rail mounting
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of https://www.thingiverse.com/thing:4943843
(thank you, DinikS for your design!!)
Changed the following:
- Top Loading (USB and Ethernet Slots open on Top). Therefore case doesn't need to be slight oversize to allow inserting ethernet ports through wall.
The wall parts above connectors are part of the Top lid (which therefore is printed upside down)
Internally shorter by one mm. This also has advantages for proper connection of USB-C and easier access of the SDCard - Opening for Audio connector removed
- Bottom wall and ethernet port wall thicker for more stability
- Removed slots on side
- Slightly size/position adjustments for USB-A opening
- Added 2mm holes for better visibility of LEDs
- Added Variant for my DCRS Hat (24V DC input and RS-232)
(Therefore the overall height has been enlarged to 26mm)
Printed on Prusa MK3S using PETG, nozzle 0.4mm, 0.150 mm layer height.
Update: Variant with foot for DIN rail added
Hints:
M3 Screws are M3 x 5
Threaded inserts are ruthex M3 inserted with ruthex applicator on soldering iron (280°C)