1 / 4
Loc-Line light mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flexible "neck" for photo & video lighting
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 172
- Makes
- 1
- Views
- 1,539
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Flexible “neck” for a light with a standard attachment point, suitable to clamp onto a 19mm lighting stand or similar tube.
The hinge screw is M4, the clamp screw is M5.
NOTE: For heavier lights (probably anything over 100-150 grams) you need to add a spine inside the Loc-Line. For my 800+ gram LED panel I added six strands of 2mm fencing wire, wound together tightly - I drilled a slightly too small hole for it into both mounting ends, and then heated up the metal with a heat gun so that it “melted” into the PLA.