1 / 3
Bend protection for USB cable - e.g. Samsung
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The connection between cable and USB plug was unstable, so I have designed this protection cap to avoid lost of function
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 77
- Makes
- 1
- Views
- 812
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Part is printed with Ninjaflex shore hardness 85A and do not need supports. To avoid stringing, I recommend to print parts separately.
To ensure a straight seat, the bend protection is built up by 2 parts. Inner part (1) support the cable and outer part (2) keep the cutted inner part together.
Size of USB-C plug: 12,3mm x 5,4mm
Assembly instruction
- After printing make a cut e.g. with a diagonal plier to part 1
- Add part 2 to cable
- Add part 1 to plug
- Slide part 2 over part 1