RaspberryPi Zero (2) snapfit case for ender 3 (pro) or v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
i needed a case for the raspberrypi zero. i didn't want to use screws, so its snapfit. it doesn't require any support.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
i needed a case for the raspberrypi zero. i didn't want to use screws, so its snapfit. it doesn't require any support. the parts are already rotated in the right direction. it took me a lot of time to make this, so I hope it works for other people too.
I wanned to keep it as clean as possible, so it's wired via serial. i use klipper with the fluid interface
I use the case on an ender 3 pro with klipper.
You can also add a fan it you want. i wired it to 24v, but you can also wire it to the pi zero on the 5v, if the fan is 5v. it's supposed to be a 30x30x10mm fan.