Shade Cover for Neewer 2-Pack Dimmable 5600K USB LED Video Light
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.98 – €1.20 net (excluding VAT)
For file: NeewerShadeCover.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.09 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.3 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Something happened to one of my lamps and it outputs light even when off. Created this Shade Cover as an Insert.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 1
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Shade Cover for Neewer Dimmable 5600K USB LED Video Light
One of the lamps still outputs light even when powered down. Something has to be wrong with the switch. In the meantime, I created an insert that would act as a block for the lamp.
Initial Print had 10 wall lines. Adjusted wall has a 3 line count and a spiralized outer contour. Took the print from a 2 and a half hour print down to an hour and 20 minutes.
