1 / 1
Gloomhaven Chaos Demon (Resin pre-supported)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix is a pre-supported version for resin printing of the original model.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 213
- Makes
- 1
- Views
- 976
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix is a pre-supported version for resin printing of the original model. Supports were created manually in Lychee slicer and successfully test-printed.
Post-Printing
"To remove the supports, use your wire cutters to clip them off the smaller appendages (tail, ends of "vines", etc.). Definitely also clip them off the horns on the demon's head or those might snap off. Then you'll be able to pull the rest of the supports off without further clipping.
I lightly sanded the bottom before gluing to a base."