Nextion 3.5 inch screen project box with usb cable power opening
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
project box supporting: a Nextion 3.5 inch display an esp32 dev kit 1 board a wemos 18650 battery shield v3 with an…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 0
- Views
- 560
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
project box supporting:
a Nextion 3.5 inch display
an esp32 dev kit 1 board
a wemos 18650 battery shield v3
with an opening for usb power cable
NOTE: there are two .stl files, one with posts for an EDP32 DOIT V1 board, another for an ESP32 board that is shorter
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15
Filament: Prusament PLA
Notes:
do not repair this stl (at least with Prusa Slicer 2.1 and Netfabb), as doing so incorrectly causes the Nextion screen opening to be sealed closed.
make sure you measure the length of your esp32 board and print off the right box
Category: Other